CyclopsEMX Display Enclosure (eg. what goes in your panel)

Suggested hole cutout in the panel is 6" wide x 6 7/8" high. 

The display will overlap to the right of the cutout by 2".

The actual dimension of the enclosure is 8" wide x 6 7/8" high.  The depth varies from 3.5" on the left to 1" on the right.

See the Install Photos for actual installation in a panel

CyclopsEMX Engine Interface Box

The engine interface box is 4 7/8" wide x 8" long x 1" high.  Note you will have the engine data coming into ports on one side and the data leaves the box on the 9pin header on the other side of the box.

You want to mount this cable coming out from this box away from your radios and antennas.