Monitor your aircraft bus voltage and set an alert if this drops too low or high.  Also, monitor how many amps your alternator is delivering.  This data is right up front and displayed where you can see it all the time.  Note you can monitor 2 bus voltages and have both displayed.

A voice alert is attached to volts and amps in case a level is exceeded.

Monitor carburetor temperature, outside air temperature, avionics stack temperature, and any other temperatures in/outside the plane with the flexible one wire bus temperature system.

These one wire temperature sensors connect to a flexible wire and can be put anywhere in the plane.

The one wire temperature sensors show up just beneath the Carb temperature.

If you use more than 3 one wire temperature sensors the data will be saved to a file that you can save to your USB flash drive.  A software update is in the works to display up to 10 temperatures.

Note the one wire bus sensor data (Stack, Cowl, Oil1, Oil2) these sensors are automatically recognized...you have rename them to what every you want.  The default names come up as 'New1' , 'New2', etc...

You can see the Serial number, position, and description of each one wire sensor as the system starts.