j

CyclopsEMX supports 8 EGT and 8 CHT probes.  Note only 4 cylinders are shown in the picutre.

Thermocouples measure your cylinder and exhaust gas temperatures.  All of your cylinders are displayed in a full scale graph.

Alert levels are clearly marked along with the highest temperature across all cylinders.  Also the current highest reading is highlighted.

Shock Cooling

See how quickly your cylinders are increasing and decreasing.  Avoid the dreaded shock cooling by setting your limit for your engine.  eg. i have my limit currently set at 60F per minute with a alert at 150F/min.

When letting down from a high altitude i can monitor the bar graph and instantly see where I am in relation to my goal setting of 60F/min and the alert level of 150F/min.

Also...why not see how fast the cylinder is increasing in temperature...see the increase represented by a number (in white) of how quickly the cylinder heats up.

Leaning

The amount rich or lean is displayed for easy reference.  Keep this display active while you are leaned out.